How to Store a 4 Stroke Outboard | Storage Tips 2023

Last Updated on August 16, 2023 by Jisan

If you’re storing your outboard for the winter, there are a few things you can do to make sure it’s in good shape when spring comes around. First, give it a thorough cleaning, including the engine and hull. This will help prevent corrosion and build-up of grime that can cause problems.

Next, change the oil and filter according to the manufacturer’s recommendations. This will help keep the engine clean and lubricated. Finally, if possible, store your outboard in a cool, dry place where it won’t be exposed to extreme temperatures or humidity.

  • Find a safe, dry place to store your outboard
  • A garage or shed is ideal
  • If you’re storing the outboard for more than a few months, remove the spark plugs and squirt a teaspoon of oil into each cylinder
  • This will prevent the cylinders from rusting
  • Clean the outboard thoroughly, paying special attention to the propeller and lower unit (the part of the engine that contains the gearbox)
  • Remove any marine growth, such as barnacles and seaweed, using a scraper or putty knife
  • Rinse the outboard with fresh water and allow it to dry completely
  • Apply a coat of wax to all exposed metal surfaces to help prevent corrosion during storage
  • 6 7 8 9

How to Store an Outboard Motor Without a Stand

Assuming you don’t have a stand and need to store your outboard motor, there are a few things you can do to ensure it is properly stored. First, make sure the engine is turned off and all fluids are drained. This includes fuel, oil, and gear lube.

Next, clean the engine thoroughly with soap and water to remove any salt or grime build up. Once the engine is dry, lightly coat all metal surfaces with WD-40 or another corrosion preventative. Finally, cover the engine with a tarp or storage bag to keep dust and debris out.

How to Winterize a 4 Stroke Yamaha Outboard Motor

Assuming you have a Yamaha 4 stroke outboard motor, there are several things you can do to winterize it. First, change the oil and filter. This will help remove any water or contaminants that may have accumulated over the season.

You should also check the air filter and clean or replace it as needed. Next, add fuel stabilizer to your gas tank to help keep the fuel fresh over the winter months. It’s also a good idea to run the engine for a few minutes after adding the stabilizer so it can circulate through the system.

Now it’s time to prepare the engine for storage. Start by disconnecting the battery and then draining all of the fluids. The oil should be drained from both the crankcase and lower unit.

Next, remove spark plugs and squirt a little oil into each cylinder before replacing them. This will help prevent corrosion while in storage. Finally, fogging spray is used on two stroke engines but not necessary on four strokes.

However, some people still like to do it just in case. With all of these steps completed, your Yamaha 4 stroke outboard motor should be properly winterized and ready for storage until next season!

How to Store Outboard Motor for Winter

If you’re like most boaters, you take pride in your outboard motor. After all, it’s what gets you out on the water! But when winter comes, you have to think about how to store your outboard motor so it will be ready for next season.

Here are some tips: 1. First, make sure your outboard motor is clean. This will help prevent corrosion while it’s stored.

You can pressure wash it or use a garden hose and brush. Just be sure to let it dry completely before storing it away. 2. Next, change the oil and filter according to the manufacturer’s recommendations.

This will also help prevent corrosion and keep your engine in top condition. 3. Now it’s time to add fuel stabilizer to the gas tank. This will help keep the gas fresh and prevent gumming up the carburetor over winter.

Be sure to run the engine long enough for the stabilizer to reach all of the engine parts that need lubricating. 4 . Finally, store your outboard motor in a dry, protected place where temperatures won’t fluctuate too much (like a garage).

Do You Have to Winterize a 4-Stroke Outboard Motor

When the temperatures start to drop, it’s time to start thinking about winterizing your 4-stroke outboard motor. This is an important process that will help ensure your motor is in good working condition when spring rolls around. There are a few different steps involved in winterizing a 4-stroke outboard motor.

First, you’ll need to change the oil and filter. This will help remove any built-up debris and grime that could damage your engine during the winter months. Next, you’ll need to add a fuel stabilizer to your gas tank.

This will help keep the fuel fresh and prevent it from breaking down over time. Finally, you’ll need to give your motor a good once-over to make sure everything is tight and secure. This includes checking all of the hoses and clamps for leaks or cracks.

Once everything is tight and secure, you can cover your motor with a tarp or storage bag to protect it from the elements. Winterizing your 4-stroke outboard motor may seem like a lot of work, but it’s really not that difficult. By taking these simple steps, you can rest assured knowing your engine will be ready to go when spring arrives.

How to Winterize a 4 Stroke Suzuki Outboard Motor

When it comes to winterizing your 4 stroke Suzuki outboard motor, there are a few key things you need to do in order to ensure it stays in good shape until spring. Here’s what you need to do: 1. Drain the Gearcase Oil

To start, you’ll want to drain the gearcase oil. This can be done by removing the oil fill plug and then tilting the motor so that all of the oil drains out. Once it’s fully drained, replace the plug and fill the gearcase back up with new oil.

2. Change The Engine Oil and Filter Next, change the engine oil and filter according to your Suzuki’s specifications. This is important because old oil can break down and cause damage over time – particularly during periods of extended storage like winter.

Fresh oil will help keep everything lubricated and running smoothly come springtime. 3. Add Fuel Stabilizer To Your Gas Tank Adding fuel stabilizer to your gas tank is also crucial – it helps prevent gumming and corrosion while your motor sits idle over winter.

Just add it directly to your tank before filling up with gas (make sure to follow the instructions on the bottle). 4. Fog The Engine cylinders Fogging the engine cylinders helps protect them from rust and corrosion while they’re not being used.

To do this, simply remove each spark plug one at a time and spray a little fogging oil into each cylinder before replacing the plugs again snugly by hand (don’t use a wrench!). Finally, give the pull cord a few pulls so that fogging oil circulates through all of the engine’s moving parts. 5 .

Store In A Dry, Ventilated Space When it comes time to actually store your motor for winter, make sure to put it in a dry, ventilated space like an unheated garage or shed (basements are typically too damp). And that’s it!

How to Store a 4 Stroke Outboard
How to Store a 4 Stroke Outboard | Storage Tips 2023 2


What Side Do You Lay a 4 Stroke Outboard?

Assuming you mean when storing the engine: Most 4-stroke outboard engines should be stored upright on their side, with the spark plug pointing up. However, it’s always best to consult your engine’s owner’s manual for specific storage instructions.

Storing an outboard engine upright prevents oil from pooling in the crankcase and potentially damaging the engine. When an outboard engine is stored on its side, oil can seep into the cylinder head through the valves, causing corrosion and damage to the piston rings. To avoid these potential problems, many manufacturers recommend draining the oil completely before storing an outboard engine on its side for any length of time.

Should Outboard Be Up Or down When Storing?

If you’re like most boat owners, you want to keep your investment in good condition. That means taking care of it when you’re not using it. One important question is whether to store your outboard motor up or down.

Here are some things to consider: 1. If you store your outboard motor up, make sure the engine is secured so it can’t fall and cause damage. 2. Storing your outboard motor down will help prevent corrosion and extend its life.

3. If you live in an area where there are severe weather conditions, it’s best to store your outboard motor down so it’s less likely to be damaged by high winds or other elements. 4. When storing your outboard motor down, make sure the propeller is protected so it doesn’t get damaged or become a safety hazard.

Do 4 Stroke Outboards Need to Be Winterized?

Just like any other engine, 4 stroke outboards need to be winterized in order to prevent damage from the cold weather. This process involves adding a special oil to the engine that will protect it from freezing and corrosion. Additionally, the boat’s fuel system must be treated with a stabilizer to keep the gas from going bad over the winter months.

Should You Run a 4 Stroke Outboard Out of Gas?

Most boat owners have, at one time or another, run their outboard engine out of gas. It’s not really a big deal, but there are some things you should know before running your 4 stroke outboard out of gas. First, when your engine runs out of gas, it will stop running and you will lose power.

This can be dangerous if you are in the middle of a lake or river and need to get to shore quickly. Make sure you have a plan in place in case this happens to you. Second, when your engine runs out of gas, it can damage the fuel system.

The fuel pump will continue to run even though there is no fuel going through it. This can cause the pump to overheat and eventually fail. Third, once your engine has run out of gas, you will need to add fresh gasoline as soon as possible.

Do not try to start the engine without adding new gasoline first – this could damage the engine beyond repair. In short, yes – it is perfectly fine to run your 4 stroke outboard engine out of gas occasionally. Just make sure you’re prepared for it and that you add fresh gasoline as soon as possible afterwards.

4 Stroke Storage, done right


Assuming you have read the blog post: The best way to store a 4 stroke outboard is to disconnect the battery, empty the fuel tank, and run the engine for a few minutes to burn off any excess oil. You should also change the oil and filter before storage.

Similar Posts

Leave a Reply

Your email address will not be published. Required fields are marked *