Do Bearing Buddies Work | Function and Benefits 2023

Last Updated on August 16, 2023 by Jisan

Bearing Buddies are devices that are placed on boat trailer axles to keep the bearings lubricated. They work by providing a small amount of grease to the bearings every time the trailer is used. This prevents the bearings from becoming dry and seizing up, which can cause damage to the axle.

If you’ve ever wondered whether Bearing Buddies actually work, wonder no more! These handy little devices are designed to keep your trailer bearings in good shape and working properly for a long time. Here’s how they work:

Bearing Buddies are placed over the hub of your trailer wheel. They act as a seal to keep out water and dirt, which can damage bearings. As the wheel turns, the Bearing Buddy allows a small amount of grease to be released onto the bearing, keeping it lubricated.

This helps to prevent premature wear and tear on the bearings, keeping them in good condition for a longer period of time. So, there you have it – Bearing Buddies really do work! If you’re looking for a way to extend the life of your trailer bearings, this is definitely one option worth considering.

Do You Need to Repack Bearings With Bearing Buddies

If you have ever wondered whether or not you need to repack bearings with bearing buddies, the answer is yes! Bearing buddies are an essential part of keeping your bearings in good working order. Here’s what you need to know about repacking bearings with bearing buddies.

Bearing buddies are basically just small metal or plastic caps that go over the ends of your bearings. They help to keep dirt and moisture out of the bearings, which can cause them to degrade over time. When you repack your bearings, you should always use fresh bearing grease and make sure that the bearing buddies are properly seated on the bearings.

If you don’t repack your bearings regularly, they will eventually start to wear down and may even fail completely. That’s why it’s important to check them periodically and repack them as needed. It’s also a good idea to keep a spare set of bearing buddies on hand in case one of them gets lost or damaged.

How to Install Bearing Buddies

Bearing Buddies are an easy way to keep your trailer bearings properly greased and free of water contamination. Installation is a snap, and only takes a few minutes. Here’s how:

1. Jack up the trailer so that the wheels are off the ground. This will make it easier to work on the bearings. 2. Remove the dust cap from the hub, and set it aside (you’ll need this when you reassemble).

3. Using a bearing packer or grease gun, fill the hub with fresh grease until it starts to come out around the edges of the races. You want to be sure to get plenty of grease in there! 4. Install the Bearing Buddies over the races, being careful not to damage them as you do so.

The spring-loaded plunger should be facing outward. 5. Replace the dust cap, making sure that it is seated correctly (it should snap into place).

How to Grease Bearing Buddies

Bearing Buddies are designed to keep your boat trailer bearings properly greased and free of water contamination. They are easy to use and provide peace of mind when towing your boat. Here is a step by step guide on how to grease your Bearing Buddies:

1. Jack up one side of the trailer and remove the wheel. 2. Pull out the old dust cap and insert the Grease Tube into the bearing buddy. 3. Pump grease into the bearing until it starts to come out of the other side.

4. Replace the dust cap and lower the trailer back down. Repeat on other side.

Bearing Buddy Maintenance

Bearing Buddies are devices that are placed on boat trailers to keep the bearings lubricated. They are simple to use and easy to maintain, but there are a few things you need to do to keep them in good working order. Here are some tips for Bearing Buddy maintenance:

1. Check the level of grease in the Bearing Buddies regularly. You should add grease if it is low, and make sure there is no excessive build-up of grease inside the device. 2. If you notice any water in the Bearing Buddies, empty it out immediately.

Water can cause corrosion and damage the bearings. 3. Inspect the Bearings periodically for wear or damage, and replace them if necessary. 4. When not in use, store your Bearing Buddies in a dry, protected place where they will not be exposed to moisture or dirt.

By following these simple tips, you can keep your Bearing Buddies functioning properly for years to come!

Bearing Buddy Sizes

If you have a trailer, then you need to know about Bearing Buddies. They are devices that keep your bearings lubricated and free of water. This prevents corrosion and extends the life of your bearings.

Bearing Buddies come in different sizes to fit different trailers. Here is a rundown of the most common sizes: -The smallest size is for utility trailers and measures 1-7/8 inches in diameter.

-The next size up is for boat trailers and measures 2 inches in diameter. -The largest size is for RV trailers and measures 2-5/16 inches in diameter. Knowing the right size Bearing Buddy for your trailer is important because using the wrong size can damage your bearings.

If you’re not sure which size to get, consult your trailer’s owner’s manual or ask an expert at a trailer supply store.

Credit: www.youtube.com

Do You Still Need to Repack Bearings With Bearing Buddies?

If you have Bearing Buddies on your trailer, you do not need to repack the bearings. The Bearing Buddies will keep the grease in the bearings and prevent water from getting in.

Do Bearing Buddies Grease the Bearings?

If you have ever wondered whether or not Bearing Buddies grease the bearings, wonder no more! The answer is yes, they do in fact grease the bearings. But how does this work?

And what are the benefits of using Bearing Buddies? Let’s take a closer look. Bearing Buddies are devices that are placed on boat trailer hubs in order to keep the bearings lubricated.

They work by slowly releasing grease into the bearings as they rotate. This helps to prevent corrosion and wear on the bearings, and extends their life significantly. There are many benefits to using Bearing Buddies over traditional methods of greasing bearings (such as manually doing it yourself).

For one, it is much less messy – there is no need to get your hands dirty or worry about over-greasing the bearings. Additionally, it is a much more efficient way of greasing bearings because all of the grease goes directly into the bearing itself rather than being wasted on other parts of the hub assembly. So if you’re looking for an easy and effective way to keep your boat trailer’s bearings lubricated, then consider using Bearing Buddies.

How Long Do Bearing Buddies Last?

Bearing Buddies are a great way to extend the life of your bearings. They are designed to keep water and dirt out of your bearings, which can cause premature wear and tear. Bearing Buddies can last for many years, but it is important to check them periodically to make sure they are in good working order.

What is the Point of Bearing Buddies?

Bearing Buddies are designed to keep your trailer bearings well-lubricated and free of water. They work by sealing off the bearing area from the elements, allowing only fresh grease to enter. This prevents water and dirt from contaminating the bearings, which can lead to premature wear and failure.

Bearing Buddies are easy to use and require no special tools or knowledge to install. Simply remove the old dust cap (if present), clean out any old grease and debris, then insert the Bearing Buddy in its place. Fill the reservoir with fresh grease until it reaches the top, then replace the dust cover (if applicable).

That’s it! Regular maintenance is still required, of course. You should check your Bearing Buddies at every tire rotation or oil change, whichever comes first.

If you notice any leaking or excessive wear, replace them as soon as possible. But overall, Bearing Buddies can help extend the life of your trailer bearings and make towing a safer, more enjoyable experience.

Bearing Buddy explanation & Greasable axle spindle

Conclusion

After reading this blog post, it is clear that bearing buddies do work and can be helpful in maintaining your bearings. However, there are some potential drawbacks to using them that you should be aware of before deciding to use them on your own vehicle. Overall, bearing buddies can be a helpful tool in keeping your bearings in good condition and prolonging the life of your vehicle.